Trick to Pulling Off the Exhaust Hanger Bushing
Having the muffler broken off the intermediate pipe while driving home in my 1995 Honda Civic EX Coupe, I was forced to remove it so that I can drive the car to the muffler shop. But removing the muffler and the rubber hanger bushing was quite difficult. No amount of pulling and pushing would budge the bushing while lying in an awkward angle underneath the car.
But watching the following video showed me the trick. The trick is basically spray silicone lubricant onto the rubber bushing, where it touches the metal hangers. I happen to have the silicone lubricant in my garage, so after spraying the rubber hanger with the spay, it slid off the metal hooks effortlessly.
Did your message disappear? Read the Forums FAQ.
Spam Control | * indicates required field
TrackBack only accepted from WebSite-X Suite web sites. Do not submit TrackBacks from other sites.
No TrackBacks yet. TrackBack can be used to link this thread to your weblog, or link your weblog to this thread. In addition, TrackBack can be used as a form of remote commenting. Rather than posting the comment directly on this thread, you can posts it on your own weblog. Then have your weblog sends a TrackBack ping to the TrackBack URL, so that your post would show up here.
Messages, files, and images copyright by respective owners.
54 Users Online
Copyright © 2004 - 2019. All Rights Reserved.