charging Creative Nomad MuVo^2 on Linux
As I have indicated in the Creative Nomad MuVo2 and Linux thread, I could not get SUSE Linux, out of the box, to recognize my Creative Nomad MuVo^2 . Unfortunately, with the way Creative designed the charging circuit on the MuVo^2, you have to eject or disconnect the MP3 player before it would start charging. Because I can't mount the MuVo^2 on SUSE Linux in the first place, I couldn't tell it to unmount to put it in charge mode.
I have found a way around this problem. However, this requires that you run the battery on the MuVo^2 all the way down before you can charge it on SUSE Linux. When the battery too low to operate the MuVo^2, the MP3 player displays a big empty battery symbol on the LCD. With the MuVo^2 turned off, plug the USB cable into the computer and then into the MuVo^2. The MuVo^2 will power up automatically. When it detects that it doesn't have enough juice, it will automatically go into charging mode. It will stay in charging mode until fully charged, until the computer is turned off, or until it is unplugged.
Here is a picture of the big empty battery symbol on the MuVo^2.
Did your message disappear? Read the Forums FAQ.
Spam Control | * indicates required field
TrackBack only accepted from WebSite-X Suite web sites. Do not submit TrackBacks from other sites.
No TrackBacks yet. TrackBack can be used to link this thread to your weblog, or link your weblog to this thread. In addition, TrackBack can be used as a form of remote commenting. Rather than posting the comment directly on this thread, you can posts it on your own weblog. Then have your weblog sends a TrackBack ping to the TrackBack URL, so that your post would show up here.
Messages, files, and images copyright by respective owners.
49 Users Online
Copyright © 2004 - 2019. All Rights Reserved.