Add Comment
|
Related Links
|
TrackBack
Wayne Dalton 9600 with Torque Master Plus ProblemI have a 8x10 wayne dalton 9600 with torque master plus system. I have been fighting with it for months and am totally frusterated. One of the problems is that when the door goes up the spring inside the tube NEEDS to be able to rotate smoothly. IT DOES NOT DO THIS WELL. Conclusion this is a piss poor design. I recommend if you have any trouble at all with your door, switch to the design with the torsion springs that are on the outside of the shaft. Jeremy
Add Comment
|
Related Links
|
TrackBack
Did your message disappear? Read the Forums FAQ. Add CommentSpam Control | * indicates required field TrackBackTrackBack only accepted from WebSite-X Suite web sites. Do not submit TrackBacks from other sites. Send Ping | TrackBack URL | Spam Control No TrackBacks yet. TrackBack can be used to link this thread to your weblog, or link your weblog to this thread. In addition, TrackBack can be used as a form of remote commenting. Rather than posting the comment directly on this thread, you can posts it on your own weblog. Then have your weblog sends a TrackBack ping to the TrackBack URL, so that your post would show up here. Messages, files, and images copyright by respective owners. |
Articles
|
Wiki
95 Users Online
|
Copyright © 2004 - 2024. All Rights Reserved. |