|
garage beeps but does not openI have an I drive garage door that will beep, but not open. My dauaghter was messing with buttons on the inside key pad one night, then it would not close. Any ideas how to fix? candice Perhaps it just need to be re-profiled. Press the profile button for five seconds to start the process. I think that is the last button on the button pad. Do you have any indication whether the button pad is communicating with the idrive? If not, they your daughter may have erased the "link". I don't remember exactly how to re-establish the connection, but it's something like pushing the red button on the idrive and then pushing one of the buttons on the button pad. Of course, the instruction manual explains how to do both of the situations described here, which you can download on this site. Chieh Cheng If you hear two beeps from the idrive, but it doesn't attempt to open/close the garage door, then it has lost its profile. Simply profile the idrive (using the profile button on the wall controller). However, if you press the profile button for five seconds, but the idrive beeps twice and doesn't attempt to open/close the door, then the obstruction sensors are not aligned (no light). Align the obstruction sensors. Once they are aligned, profile the idrive. Chieh Cheng
Did your message disappear? Read the Forums FAQ. Add Comment
TrackBackTrackBack only accepted from WebSite-X Suite web sites. Do not submit TrackBacks from other sites.
No TrackBacks yet. TrackBack can be used to link this thread to your weblog, or link your weblog to this thread. In addition, TrackBack can be used as a form of remote commenting. Rather than posting the comment directly on this thread, you can posts it on your own weblog. Then have your weblog sends a TrackBack ping to the TrackBack URL, so that your post would show up here. Messages, files, and images copyright by respective owners. |
Articles
|
Wiki
72 Users Online 
|
|
Copyright © 2004 - 2024. All Rights Reserved. |
|
Related Links
|
TrackBack
