idrive opens door part way then stops

Add Comment | Related Links | TrackBack
Related Content

idrive opens door part way then stops

My iDrive starts opening the door then stops. If I try again it only opens a little bit and stops. No grinding of gears or anything. A couple chirps and that is it. I have to manually help it to open all the way.
Help!!!!
Thanks,

RichS
Thu, 20 Jun 2013 02:34:17 +0400

Is that a "idrive for torquemaster" or a "idrive for torsion bar"? Mine is the latter. And in my experience, if that happens, it's because: 1) your garage door is now out of balance; or 2) your garage door characteristic changed slightly.

For cause #2, re-profile the idrive to your garage door and it'll work once again.

For cause #1, you have to re-balance your garage door. Use the procedure in your idrive manual to check whether your garage door is balanced.

Chieh Cheng
Thu, 20 Jun 2013 04:43:08 +0400

Add Comment | Related Links | TrackBack
Related Content

Did your message disappear? Read the Forums FAQ.

Add Comment

Spam Control | * indicates required field

TrackBack

TrackBack only accepted from WebSite-X Suite web sites. Do not submit TrackBacks from other sites.

Send Ping | TrackBack URL | Spam Control

No TrackBacks yet. TrackBack can be used to link this thread to your weblog, or link your weblog to this thread. In addition, TrackBack can be used as a form of remote commenting. Rather than posting the comment directly on this thread, you can posts it on your own weblog. Then have your weblog sends a TrackBack ping to the TrackBack URL, so that your post would show up here.

Messages, files, and images copyright by respective owners.

Fun for Photographers