Jan 4, 2009 · If this is the case, you will have to pry the sleeve away from the tube's inside, then slowly extract the sleeve with pliers. Sholud not be too ...

Jul 1, 2009 · If your spring is working at all, chances are it is not broken. Before you purchase new springs, closely check the spindle that the cable winds ...

Jun 3, 2006 · My advise to all is if you are having problems - first manually cycle your door to make sure it is in balance and has no friction spots. The ...

Apr 16, 2015 · With the door down, if you push the button to raise it, the motor runs and makes a nasty grinding sound. The door does not move. If you pull the ...

Jun 26, 2007 · It got stuck a few times in the past week. I pull the quick-release handle and played with the door a bit. It's obvious that it's bottom heavy.

Dec 6, 2005 · They should be lubricated every few months with silicone spray. Now that we are exercising them at least four times a day, I'm not surprised ...

Fixing the Torsion Springs on Wayne Dalton Torque Master. Thu, 16 Nov 2017 14:38:00 -0800. Torque Master idrive struggling to raise the door. Fri, 14 Jul 2017 ...

Nov 22, 2009 · I am disappointed in wayne dalton I bought a set of springs from them and the directions are not that helpful at all.I have everything ...

Apr 23, 2012 · The door is in the closed position, the motor is down, but still locked to the torsion bar. Pulling the release cable does not release the motor ...

Nov 24, 2023 · I noticed that the idrive raises the door all the way to the top and it could require a lot of torque to start the closing motion. So I figured ...