Jun 3, 2006 · My advise to all is if you are having problems - first manually cycle your door to make sure it is in balance and has no friction spots. The ...

See if the garage door is balanced... Does not move is the 1/4, 1/2, and 3/4 open position. If it is not balanced, idrive may not have enough force to push it ...

It will open but will not close. The motor strains when trying to close as if there were an obstruction. When I release the door to close manually, if moves ...

Apr 16, 2015 · With the door fully closed, if you hit the button to lift the door, the motor turns, the door does not move, and there is a mechanical grinding/ ...

When you open a well-balanced garage door manually, all you do is use the torsion bar, springs, and cables to lift the door for you. That's what the iDrive does ...

Jan 4, 2014 · When I put the red handle in the manual position the door freely moves from full open to full close and from full close to full open. The door ...

Dec 6, 2005 · The idrive opener will open the door fully and stop. Then it will close the door completely. Finally, it will perform the up and down cycle ...

Apr 23, 2012 · The door is in the closed position, the motor is down, but still locked to the torsion bar. Pulling the release cable does not release the motor ...

Jul 28, 2010 · Programming the idrive Garage Door Opener. I purchased a house 2 months ago equipped with a Wayne-Dalton idrive garage door opener.

During programming the garage door may operate. Pull the Manual Disconnect to put the operator in the disengaged position (see Step 1 below). Make sure people ...